Detailed Product Description
| Type: |
Dual 5 Inch Line Array |
Brand: |
Cvr PRO Audio |
| Painting: |
Textured Painting |
Apply: |
Mini Line Arry |
| Sound: |
Clear Sound System |
|
|
| High Light: |
line array speaker system, powered speaker system |
Dance Floors Sound 5 Inch Active Line Array System Dual Array Equipment
DESCRIPTION and APPLICATION
W-25 is a line array system which is made of two 5"woofers, a 1.4"titanium compression driver and high performance low distortion compression driver with innovative horn design of wave phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required,a W-25 will integrate seamlessly with W-102P line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely.
W-25 is veryversatile and scalable for a wide range of applications in touring performance,corporate and fixed installation fields.
W-102P is a dedicated high performance sub-bass system designed to augment the low frequency output of W-25. The W-102P features a highly efficient power amp module and incorporate DSP. This efficient design enables the flown combination of W-102P and W-25.The physical dimensions of W-102P are identical to the W-25 and it's equipped with the same proprietary rigging system.It's features with two 10"inch woofers with magnet structure and suspensions engineered for maximum linear excursion.
SPECIFICATION:
| Model |
W-25 & W-102P
|
| Type |
Line array system |
|
Line array sub-bass system(W-102P)
|
| Frequency Response |
90Hz-20KHz±3dB |
| 45Hz-150Hz±3dB(W-102P) |
| Power handing |
LF 160W(RMS)320W(PEAK) |
|
HF 60W(RMS)120W(PEAK)
|
| 400W(RMS)800W(PEAK)(W-102P) |
| Sensitivity |
LF 92dB(1W-1M) |
| HF 108dB(1W-1M) |
| 103dB(1W-1M)(W-102P) |
| Max-S.P.L |
LF 114dB(PEAK/1M) |
| HF 126dB(PEAK/1M) |
| 129dB(PEAK/1M)(W-102P) |
| LF section |
2×5"(135mm) woofer |
| 35mm(1.5in)coil |
| Components |
2×10"(260mm)woofers |
| 50mm(2in)coil(W-102P) |
| Nominal impedance |
16 ohm |
| 4 ohm(W-102P) |
| HF section |
1×1.4"compression driver |
| with 34mm titanium diaphragm |
| Nominal impedance |
16 ohm |
| Output section |
2-channel |
| Dispersion pattern |
110°H×9°V |
| Finish |
Black paint |
PACKAGE:
| Array design |
Arrays of less than 3×W-25 will |
| provide poor dispersion control and |
| are neither recommended nor supported |
| Speaker cables |
1(+)1(-)Built in crossover |
| |
| Rigging system |
Please refer to the W-25 user |
| manual before any operation |
| Input connectors |
2×NL4MP speakon |
| Recommend crossover |
80Hz-20KHz |
| |
| 42Hz-120Hz(W-102P) |
| Dimensions |
410×163×248mm(W×H×D) |
| 408×300×493mm(W×H×D)(W-102P) |
| Package dimensions |
480×230×320mm/0.04cbm |
| 480×370×560mm/0.1cbm(W-102P) |
| Enclosure |
PU(W-25)/Plywood(W-102P) |
| Net weight |
7.8kg(W-25) / 23kg (W-102P) |
| Gross weight |
9kg(W-25) / 25kg (W-102P) |
